Yellow alarm on Wildcard TE210 dual-span T1/E1/J1

[egla]

Hello,
I have an E1 line wich it worked perfectly but suddenly it shows a yellow alarm on Wildcard TE210 dual-span T1/E1/J1.

The configuration of our spans is as follow:

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RECOVERINGClockSource
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS/CRC4
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47

# Global data

loadzone = us
defaultzone = us

active=yes
alarms=Yellow
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P (3rd Gen)
location=Board ID Switch 0
basechan=1
totchans=31
irq=90
type=digital-E1
syncsrc=2
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[2]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE210P (3rd Gen)
location=Board ID Switch 0
basechan=32
totchans=31
irq=90
type=digital-E1
syncsrc=2
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS

Please can anyone help me, a think i have tried all and i cannot find whats wrong with it.
Thanks a lot

[ianplain]

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RECOVERINGClockSource
span=1,1,0,ccs,hdb3

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS/CRC4
span=2,2,0,ccs,hdb3,crc4

Ian

[egla]

The 1 is E1 from telkom, the second span is from GSM GateWay.

[ianplain]

Ok its just the comments in the files didnt match the settings you have.

Where r u based and are you sure you dont need crc4 ?

as you configs confict for span 1

[egla]

Our telekom doesn`t support CRC4