Installing Asterisk Now, Fuzzy Screen

Get help with installing and running AsteriskNOW.

Moderators: Moderator, Support

Installing Asterisk Now, Fuzzy Screen

Postby FN » Mon Oct 01, 2007 5:07 pm

Sorry i have made a post in the wrong section at first i didn't see the Asterisk Now section.

Hi all,

This is my first post here so please go easy...

I am trying to install asterisk on a machine with Asterisk Now. I boot from the disc, the start screen comes up and I press enter to install. But after a minute or so the screen goes fuzzy like a TV that hasn't been tuned.

I can install Asterisk Now on the same machine on a Virtual machine in Microsoft Windows, but not a complete install for the whole machine.

Anyone got any ideas please?

Thank You
FN
Newsterisk
 
Posts: 15
Joined: Mon Oct 01, 2007 4:18 pm
Location: Rochdale, Lancashire, UK

Postby ianplain » Mon Oct 01, 2007 5:12 pm

It sounds as if *now doesnt support your video card/monitor combination.

What you are proberly seeing is the info passing up the screen corrupted.

Ian
ianplain
Moves Like Spencer
 
Posts: 3080
Joined: Thu Dec 14, 2006 7:01 am
Location: Bath, UK

Postby FN » Mon Oct 01, 2007 5:16 pm

It starts off fine then goes funny, I would test it on another machine but I don't have one spare. I have tried a different monitor still get the problem. I also download Asterisk Now and burnt another copy just in case but again I still get the problem.
FN
Newsterisk
 
Posts: 15
Joined: Mon Oct 01, 2007 4:18 pm
Location: Rochdale, Lancashire, UK

Use Text install

Postby kdub » Mon Oct 01, 2007 8:25 pm

Hi,

I had the same issue. I was able to run anaconda in the text based setup (there is a command on the first graphical splash screen on setup)

Hope this helps.

kent
kdub
Newsterisk
 
Posts: 2
Joined: Mon Oct 01, 2007 8:11 pm

Postby FN » Tue Oct 02, 2007 11:28 am

Thanks allot worked a treat!
FN
Newsterisk
 
Posts: 15
Joined: Mon Oct 01, 2007 4:18 pm
Location: Rochdale, Lancashire, UK


Return to AsteriskNOW Support

Who is online

Users browsing this forum: No registered users and 7 guests